You will need RealPlayer G2 to view the videos below.

"Distracted Driving – At What Cost?"

There's a lot of talk about this issue but most of us don't realize how often we’re distracted while driving. A new study shows that up to 50% of crashes involve some sort of driver distraction. This new video helps us become aware of this increasingly dangerous behavior.

The video includes a two car crash that is investigated and shows how each driver was distracted leading up to the crash. It also includes an interview with a woman who was severely injured in a crash caused by a distracting cell phone conversation. Her parents also talk about how their entire family's lives were changed by the crash.

There are two slightly different versions available. The only difference is the first two opening minutes.

One opening features a quick series of humorous scenes that illustrate common driving distractions but we show them in non-driving situations to emphasize the foolishness of not focusing on the main task at hand.

The other version includes a serious opening scene. Other than the first two minutes, the programs are identical.

15 min Price: $495

"Delivery Van Defensive Driving"

Program highlights include pre-trip inspections, van handling characteristics, proper driving procedures, special practices for varying weather conditions, and proper procedures for making deliveries. 

17 min Price: $495

“Driving Safely”   
Also Available in Spanish Language Version

This program is an excellent tool to improve the driving skills of your workforce and to reduce the costs associated with motor vehicle injuries and property damage. Topics covered include accident causing human factors like distraction, fatigue and alcohol use as well as basic vehicle maintenance, defensive driving and what to do in case of an accident.

18 min  Price: $395

“Driving Safely Tactics: The Blindfold Effect”

This dramatic video focuses on three driving situations which are involved in over half of all collisions - intersections, backing and following too closely.

17 min  Price: $495

“Driving Safety - When You Least Expect It”

This program provides positive reinforcement in a dramatic way through real “accidents” executed by professional stunt drivers. A wide variety of safe driving skills and procedures are demonstrated in a way that allows every viewer to absorb the motivational message — PAY ATTENTION. Stresses defensive driving attitude as well as practicing defensive driving techniques.

19 min  Price: $395

DEFENSIVE DRIVING SERIES                   

A comprehensive, full screen full-motion multimedia training program designed to help employees become better prepared to deal with the challenges of safe driving and learn to avert accident and injury on the road.

Available in:
	CD-ROM	VIDEODISC	VIDEOTAPE/ WORKBOOK

Package Price: $885 for 4-program set

#1 "Before You Drive"

How attitudes, emotions, and habits affects your driving ability. How to perform a vehicle inspection.

20 minutes Price: $260.00

#2 "Defensive Driving Techniques"

Searching for & identifying hazards, maintaining a space cushion, safely navigating intersections & expressways.

29 minutes Price: $260

#3 "Hazards on the Road"

Discussion of various hazards such as shoulder/wheel drop-off, skids, hydroplaning, spinouts, bad weather and lighting, vehicle breakdown. Illustrates proper recovery procedures when vehicle control is compromised.

16 minutes Price: $260

#4 "Special Maneuvers"

Demonstrates proper procedures for backing, parking, passing, and towing.

15 minutes Price: $260

“Static Electricity: The Unseen Danger”

The uncontrolled build up of a static charge can be as deadly as a ticking time bomb - an enemy that needs only the right conditions to touch off a raging fire. This program explains how and why static electricity occurs, generators, and the techniques that are used to control the generation and accumulation of static electricity.

25 minutes Price: $410

THE ELECTROSTATIC DISCHARGE CONTROL TRAINING PROGRAMS             

Designed for both manufacturing and service environments to help prevent unnecessary damage to sensitive electronic components due to improper storage, handling, or packaging procedures. A comprehensive, full-screen full-motion multimedia training program from to help your company effectively control unnecessary damage from electrostatic discharge. 

Available in:
	CD-ROM	VIDEODISC	VIDEOTAPE/ WORKBOOK

Price: $475 as 3-program set

Tape 1: "Electrostatic Discharge Control"

20 minutes Price: $299

Tape 2: "Controlling ESD in the Manufacturing Environment"

12 minutes Price: $149

Tape 3: "Controlling ESD in the Service Environment"

5 minutes Price: $99.00

Electrical Safety for Industrial Facilities Series

It's here! One of the most comprehensive videotape training programs on electrical safety is ready to be put to use in your organization. Shot entirely on location, in a major industrial facility, the series uses journeyman electricians, not actors, to portray the scenes in the program. Combined with high quality 3-D animation and graphic presentation the series is designed to highlight and enhance your company's overall directive on electrical safety. This series is extremely effective for use in safety meetings, for new employee orientation or as refresher training for veteran employees.

Each program in this 10-part series includes a detailed facilitators guide containing program objectives, pre-test, unit-test, and post-test questions. The testing materials provide an excellent means for measuring program comprehension both before and after the program has been viewed. The pre and post-test questions also provides a record of training for employee reference and tracking.

Price: $2995/VHS
Price: $2995/DVD
Price: $2995/CD

Part One: Electrical Hazards

The goal of any electrical safety program is to eliminate the possibility of injury from electricity. In part one of our series on electrical safety for industrial facilities, we create an awareness of just how dangerous electricity is by describing and illustrating the effects electricity have on the body based on current, voltage, time, path, and resistance.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Two: Personal Protective Equipment

Just knowing the dangers of electricity is not enough to prevent injury. People need to know how to protect themselves by using the correct types of personal protective equipment. In part two of our series we look at various types of personal protective equipment in use today along with maintenance and inspection guidelines as required by OSHA.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Three: Effects of Electric Shock

The amount of injury from electric shock depends on several factors. The wetness of the skin, the way the victim contacts the voltage, the type of surface the person is standing on, the types of shoes they are wearing, and the level of voltage involved. In this segment we illustrate how electricity behaves and how shock can result.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Four: Energized Equipment

Energized work is defined as work performed on a component of an electrical power system within reaching, stumbling, or falling distance of an energized component. In part four, we discuss the hazards of energized work, give safety recommendations, and illustrate the dangers of shock, arc, and blast.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Five: Deenergized Equipment

Deenergized work can be as hazardous as energized work because many times only part of the power system is deenergized. In this segment we demonstrate how to isolate or "clear" parts of an electrical system, look at lockout /tagout procedures, and show how to select and install temporary grounds.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Six: Permanent System Grounding

Proper bonding and grounding is a necessary requirement for electrical systems and equipment. In this segment we identify and demonstrate general requirements for bonding and grounding of electrical installations.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Seven: Personal Protective Grounding

Personal protective grounds provide the primary protection in the event a circuit under repair inadvertently becomes energized. In this segment we identify the function of personal protective grounds, describe basic design requirements for personal protective grounds and demonstrate techniques for installing and removing personal protective grounds.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Eight: Electrical Equipment Hazards

Specific hazards exist in most all electrical systems and components. In this segment of our electrical safety for industrial facilities series, we look at hazards associated with circuit breakers, fuses, transformers, contactors, cables and batteries.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Nine: Analyzing Electrical Hazards

Being able to accurately analyze electrical hazards is essential if safe work procedures and policies are to be developed. In part nine, we identify the physical effects associated with shock, arc and blast. We also determine flash protection distances and the types of personal protective equipment required for these distances, describe incident energy under various fault conditions, and discuss blast pressure under specific fault conditions.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Part Ten: Electrical Safety Related Work Practices

In the final segment of our electrical safety for industrial facilities series we focus on electrical safety related work practices as it applies to employee training and qualification. We also discuss approach distances to live parts, personal and other types of protective equipment, and specific safety related equipment and work practices.

Price: $295/VHS
Price: $295/DVD
Price: $295/CD

Electrical Maintenance and Inspection Series

Electrical accidents, equipment failure, and downtime are often the result of inadequate maintenance or inspection practices. Implementing a good maintenance routine is imperative to maintain profits and minimize costs and outages. Our new twelve-part video training series shows plant workers and supervisors how and what to inspect to optimize maintenance dollars. This series will teach you how to reduce machinery failures and unscheduled outages so you can improve equipment reliability and increase run time. On-site demonstrations at actual production facilities and computerized animation will teach you how to analyze the results of a maintenance and inspection program and identify existing and potential trouble spots.

163 minutes Price: $3495

Basic Electrical Safety

Covers electrical injuries, types of electrical hazards, common electrical accidents, and guidelines on working safely near electricity.

13 minutes Price: $295

The Value of Inspection

Explains the types of preventive maintenance, benefits of inspection and maintenance and condition-based maintenance methods.

11 minutes Price: $295

NEC Compliance Inspections

Describes service requirements, common mistakes, safe working distances, grounding, wire sizes and types, equipment protection, and circuit breakers and fuses.

19 minutes Price: $295

Hazardous Environments

Reviews NEC environment guidelines, categories of hazardous environments, types of equipment approved for use, equipment marking, and common problems.

11 minutes Price: $295

Electrical Protective Systems: Inspection and Testing

Outlines the different types of protective systems and how to test them. Methods include: engineering analysis, engineering studies, harmonic analysis, condition and serviceability inspections, and ground mat analysis.

14 minutes Price: $295

Circuit Breakers: Inspection and Testing

Illustrates the different types of circuit breakers and inspection techniques and how to test them using contact resistance measurements, primary injection tests, high potential tests, and more.

16 minutes Price: $295

Transformers: Inspection and Testing

Covers dry-types, liquid-filled, and instrument transformers. Explains why transformers fail and how to safely inspect them.

17 minutes Price: $295

Switchgear: Inspection and Testing

Describes panel board and metaclad switchgear and how to inspect them using mechanical, visual, and electrical testing.

12 minutes Price: $295

Rotating Equipment: Inspection and Testing

Explains how to extend the life of generators and motors. Also describes in-service inspections, current and voltage tests, vibration analysis, and insulation resistance testing.

13 minutes Price: $295

Protective Relays: Inspection and Testing

Shows how instantaneous and built-in delay relays work. Explains how to inspect and maintain relays using as-found tests, visual and mechanical inspection, and as-left testing.

17 minutes Price: $295

Safety Inspections

Explains how to conduct inspections according to OSHA standards. Also covers installation inspections, safe distance requirements, wiring design and protection inspections, and electrical safety-related work practices.

15 minutes Price: $295

Condition-Based Maintenance

Explains the theory of condition-based and predictive maintenance and shows how to create a real-world performance baseline to tailor a program to fit your company.

9 minutes Price: $295

Electrical Power Equipment Safety Series

Here are twelve videotape training programs designed to cover specific electrical power equipment components. Each program covers operational as well as safety concerns for each system.

97 minutes total Price: $3495

Power Transformers

This program illustrates the basic design of a power transformer, how it works, and safety concerns to consider when working with this equipment.

10 minutes Price: $295

Potential Transformers

One of the major hazards associated with potential transformers is electrical backfeed. This program discusses this hazard and what to do to minimize it, as well as illustrating the potential transformer design.

7 minutes Price: $295

Air Magnetic Circuit Breakers

This program discusses and illustrates the design and operation of air magnetic circuit breakers as well as safety concerns associated with this piece of equipment.

10 minutes Price: $295

Current Transformers

Current transformers are used in electrical power systems to step up or step down current. In this program, we look at current transformers, how they operate, and what safety precautions to follow when working on them.

7 minutes Price: $295

Power Distribution Systems

The use of a current, up-to-date, one line diagram is essential for work on electrical equipment. In this program we look at the importance of the one line diagram when working on power distribution systems as well as safety concerns to be aware of when working on power distribution systems.

8 minutes Price: $295

Motor Control Centers

This program looks at the main hazards associated with motor control centers, what they are used for, and safety precautions to follow when working around them.

8 minutes Price: $295

Contactors

This program discusses contractors, how they are used, maintenance, and safety precautions to follow when working with them.

7 minutes Price: $295

Fuses

One of the more reliable types of overcurrent protective devices if the fuse. This program looks at the key components of the fuse, how they are rated, and the visual and mechanical inspection procedures.

10 minutes Price: $295

Molded Case Circuit Breakers

Molded case circuit breakers are used primarily for low voltage circuit protection. In this program we look at the major components of molded case circuit breakers, the four trip elements used in them, commonly performed tests, as well as safety precautions to follow.

11 minutes Price: $295

Vacuum Circuit Breakers

This program illustrates the major components of a vacuum circuit breaker, how it operates, as well as safety practices to follow when working with them.

6 minutes Price: $295

Oil Circuit Breakers

This program looks at oil type circuit breakers, how they operate, along with safety precautions to follow when working with them.

8 minutes Price: $295

Sulfur Hexafluoride (SF6) Circuit Breakers

This program looks at the major components of SF6 circuit breakers as well as generally accepted safe work practices to follow when working with them.

7 minutes Price: $295

Electrical Safety for Non-Electricians Series

Here is a ten-part videotape series with workbook designed to teach electrical safety for non-electrical personnel. Every year people are injured or killed by electricity. Many times, occupations that seem to have little or no risk associated with electrical injures account for the majority of these injuries or fatalities. OSHA has even identified occupations that now require annual training in electrical safety. This series helps meet and document these training requirements.

135 minutes total Price: $2895

Part 1: Introduction to Electrical Safety

This segment provides a general overview of electricity and how electrical shock injures and kills. It explains what voltage level is the leading cause of accidents and fatalities and discusses common misconceptions regarding certain types of electrical protective devices.

16 minutes Price: $295

Part 2: Power Distribution Hazards

Part two discusses the safety hazards associated with power lines. It explains the various voltages involved and what to be aware of when working near energized lines and equipment.

16 minutes Price: $295

Part 3: Hazards of Stored Power

This segment illustrates the hazards associated with stored power including induces voltages, static electricity, residual voltages, and devices that store them such as capacitors and batteries.

15 minutes Price: $295

Part 4: Common Electrical Hazards in the Workplace

Part four describes the more common types of electrical hazards in the workplace and what to do about them to minimize the possibility of injury.

22 minutes Price: $295

Part 5: Equipment Lockout and Tagout

No program on electrical safety would be complete without discussing proper lockout and tagout procedures. In this segment we explain, in broad terms, this very important procedure.

12 minutes Price: $295

Part 6: Working Safely with Electrical Equipment

Common electrical tools and equipment can cause injury or death. In this segment we discuss the hazards associated with hand tools, extension cords, grounding systems, and electrically powered machines.

17 minutes Price: $295

Part 7: Emergency Treatment of Electrical Injuries

This segment illustrates what to do when an electrical injury has occurred starting with accessing the scene to protect yourself through emergency first aid.

11 minutes Price: $295

Part 8: The Most Common Electrical Accidents

Part eight describes the more common types of electrical accidents, how they are caused, and ways to minimize them.

18 minutes Price: $295

Part 9: Current-Interrupting Equipment

This segment illustrates current-interrupting equipment including fuses, circuit breakers, and ground fault current interrupters.

13 minutes Price: $295

Part 10: The Importance of Proper Grounding

Proper grounding of electrical equipment is extremely important. In this segment we illustrate what grounding does and discuss ways to insure that the equipment you use is properly grounded.

11 minutes Price: $295

Electrical Safety Related Work Practices Series

Here are six videotape training modules designed to become an integral part of your overall electrical safety training program. Produced as a result of a training requirement by the Occupational Safety and Health Administration (OSHA) regarding work performed on or near energized and de-energized parts of electrical equipment, use of electrical protective equipment, and the safe use of electrical equipment.

53 minutes total Price: $1495

Effects of Electric Shock

This module describes the effect of electric shock. It explains the relationship between voltage, current, resistance, and the time of exposure to an electric shock. It also covers recommended safety procedures for avoiding electric shock.

11 minutes Price: $295

Electrical Protective Equipment

This module discusses the most common types of electrical protective equipment in use today. It also covers inspection, use, application, and safety.

11 minutes Price: $295

Safe Testing of Electrical Equipment

This module explains the hazards associated with testing electrical equipment. It demonstrates recommended techniques and procedures for minimizing these hazards.

10 minutes Price: $295

Uninterruptible Power Supply Systems

This module illustrates how to work safely around UPS systems, the danger of electrical shock and arc, and the special safety concerns posed by the battery banks in the systems.

10 minutes Price: $295

Electrical Switching Procedures

This module discusses safe electrical switching procedures. It describes the importance of safety one-line diagrams, proving cleared zones for protection, obtaining written work orders, and more.

10 minutes Price: $295

Rotating Equipment

This module discusses the mechanical and electrical hazards associated with rotating equipment. It describes the importance of lock-out/tag-out procedures when working on this type of equipment. 9 minutes.

9 minutes Price: $295

"Basic Electrical Safety - for Non-Electricians"

This comprehensive program is designed for general employees to raise awareness about electrical hazards and help prevent common electrical injuries. The valuable information helps protect employees on and off the job. Topics include:
• Basic Electrical Terms and Definitions
• Common Electrical Hazards
• Safety Practices to Prevent Injury

15 minutes Price: $399

 

LASER SAFETY
Incorporates the key components of the ANSI and OSHA guidelines for laser safety training. Covers physics of lasers, laser types & applications, physiology of the eyes & skin and damage caused by overexposure to laser radiation, safety precautions, control measures, safe work practices. Five programs.

Price: $1275 for 5-program set

 

Tape 1: "Laser Safety and Laser Hazards"

24 minutes Price: $350

 

Tape 2: "Low, Medium and High-Powered Lasers"

24 minutes Price: $350

 

Tape 3: "High-Powered Lasers in Manufacturing"

8 minutes Price: $195

 

Tape 4: "High-Powered Lasers in the Laboratory"

10 minutes Price: $250