|
| You
will need RealPlayer G2 to view the videos below.  |
|
 |
“Back
Safety for Construction Personnel”
A two-part program instructing workers on safe working postures to use to perform
daily operational tasks on any job site without injury. International ergonomics
consultant Dr. Richard Bunch demonstrates “neutral” work postures
for operating heavy machinery, laying bricks, leveling cement, using shovels,
operating a jack hammer and working overhead with tools. 54
minutes.
Price: $330 VHS DVD
“Oxyacetylene Safety”
Also
Available in Spanish
Language Version
This program shows the importance of following
basic safety rules when working with oxyacetylene mixtures. Ten rules of
oxyacetylene safety are given and illustrated. The program also demonstrates
the serious dangers and effects of misuse of oxyacetylene equipment.
25 minutes
Price: $410
“Welding Safety
In The Workplace”
Also
Available in Spanish
Language Version
Reminds employees of the various hazards associated with welding, from heat
stress to toxic fumes to sparking fires. Various welding methods are outlined
and safe working practices are stressed.
17 minutes
Price: $395
“Fire Safety In Cutting And Welding”
Also
Available in Spanish
Language Version
Illustrates the steps to take before, during
and after any cutting or welding job involving either torch or electrode.
17 minutes
Price: $295
“Hand and
Power Tool Safety”
Also
Available in Spanish
Language Version
Shows how accidents can be significantly reduced by applying good general safety
rules, and reviews what hazards are associated with the specific types of tools
employees use.
19 minutes
Price: $395
“Contractor Safety Orientation”
Also
Available in Spanish
Language Version
For contract employees at industrial work sites, this video addresses compliance policies concerning substance abuse, driving on the work site, hot work and confined space entry permits, the use of ladders and scaffolds, trenching operations, the use and disposal of hazardous materials, first aid for exposure to hazardous chemicals, and emergency evacuation procedures.
15 minutes
Price: $410
“Training
the Traffic Control Person”
Instructs personnel on handling traffic in and around construction projects.
Covers proper techniques, procedures, equipment and attitude.
15 minutes
Price: $160
Contractor Safety
Nearly half of all the work performed in our plants is performed by contract labor. This 15-minute video provides an excellent orientation for new and veteran contract personnel by giving generally accepted safe work practices to follow when working in an industrial environment.
15 minutes
Price: $495
|
|
|
|
This program focuses primarily on typical concerns associated with the proper selections, use and care of personal fall arrest systems. It lists the basic parts in detail, explains the different usage considerations of vertical lifelines and horizontal lifelines, describes the proper way to use a personal fall arrest system, and illustrates the things to look for when inspecting a personnal fall arrest system.
19 minutes
Price: $410
“Fall Prevention in the
Workplace”
Also Available in Spanish
Language Version
Provides the information employees need to work safely when they are “off the ground” in a wide variety of workplace settings and satisfies the major training requirements in the OSHA Fall Protection Standard.
15 minutes
Price: $395
|
|
|
|
"Construction Fall Protection"
According to recent statistics, falls in the workplace account for almost 10% of all fatal occupational injuries. Designed to cover the revised standard on Fall Protection - Subpart M, this comprehensive program effectively instructs both employee and employer on the hazards of falling, important preventive measures, and much more.
12 minutes
Price: $389
“Preventing
Slips, Trips and Falls for General Industry”
Available in Spanish
Language
Version
This Program is designed to address the needs of a general industry work setting. It explains the causes and mechanics of slips, trips, and falls, identifies areas where slips, trips, and falls may occur, gives preventative measures, and instructs how to respond to accidents. Specific areas addressed include parking lots, sidewalks, entrances, receiving areas, lobbies and hallways, areas with food or beverage services, restrooms, stock rooms, vending areas, stairways, and more.
Price: $389
Shows the effect of slips and falls caused by wet floors, spills, electrical cords, lack of visibility, open and misplaced equipment and improper reaching.
10 minutes
Price: $395
 |
|
|
|
“Aerial Work Platforms”
This program instructs employees on the safe use of self propelled aerial work platforms. Topics include walk around inspection, functional test, work site check; tools and materials, PPE, working and shutdown procedures, and moving or transporting the platform.. A Pre-Job Checklist is included in the Leader’s Guide.
16 minutes
Price: $410
This video covers the basics of safe operation for aerial work platforms. Topics covered include daily operator inspection, safe operational practices, and safe shutdown and storage procedures.
10 minutes
Price: $275
“Scaffold Safety: It’s
No Joke”
This program uses humorous scenarios to reinforce the serious message regarding the safety requirements that apply no matter what type scaffold is being used. It explains the hazards of setting up a scaffold without being qualified, of using substandard guardrails or defective or damaged ropes or planks, of working around overhead electrical lines, and of overloading the scaffold with debris or other material.
17 minutes
Price: $410
“Getting to the Top: Safe Use of Scaffolds”
This program details the most widely used types of scaffolds - stationary upright, mobile/rolling and suspended. Specific safety precautions to exercise when using each type of scaffold are explained, including safe erection, securing, planking and safety lines.
12 minutes
Price: $410
“Working Safely With Suspended Scaffolding”
This program teaches proper erection, maintainance and use of scaffolding equipment, including the bosun’s chair. Topics covered in the program include still load versus working load considerations, platforms and planking, the danger of power lines, personal fall arrest systems, and more.
23 minutes
Price: $395
“Working Safely with Supported Scaffolding”
This program shows employees the ways to correctly erect, maintain and use scaffolding equipment. Topics addressed include creating a level and stable foundation, platform hazards, personal fall arrest systems, guarding against falling objects, debris nets, and ramps, stairs and walkways.
25 minutes
Price: $395
“Getting to the Top: Safe Use of Ladders”
This comprhensive video examines both portable and fixed ladders in a wide variety of workplaces, including construction sites, water towers, petrochemical plants and refineries, and reenacts common fall scenarios. Topics include common sense rules for safe use,.selecting the right ladder for a particular task, and thorough inspection before each use.
12 minutes
Price: $410
“Ladders”
Reviews various types of ladders used in construction and teaches proper selection. Correct setup, use and handling are
demonstrated.
18 minutes
Price: $160
|
|
|
|
POWERED INDUSTRIAL TRUCK SAFETY SERIES:
|
4 program set Price: $1295 |
 |
#1 "Forklift Safety"
Also Available in Spanish Language VersionA forklift accident can cost your company thousands of dollars in damaged products, wrecked equipment, and injured workers. This comprehensive, award-winning program will save you time and money by providing you with everything you need to set up a successful program.
Available in VIDEOTAPE/
WORKBOOK
11 minutes
Price: $389#2 "Order Picker Safety"
Also Available in Spanish Language VersionOrder pickers are used in many storage environments and are especially dangerous because the operator goes up and down with the load. Demonstrates safety practices specific to this piece of equipment, including the use of fall protection.
9 minutes
Price: $389#3 "Powered Pallet Jack Safety"
Also Available in Spanish Language VersionFocuses on the safe operation of both the walkie style and walkie-riders.
8 minutes
Price: $389#4 "Reach Truck Safety"
Also Available in Spanish Language VersionExplains how to evaluate rated capacity, pick and place loads and clear racking.
8 minutes
Price: $389
"Forklift Safety"
A forklift accident can cost your company thousands of dollars in damaged products, wrecked equipment, and injured workers. This comprehensive, award-winning program will save you time and money by providing you with everything you need to set up a successful program.
• Perform inspections
• Implement safe forklift operations
• Provide operator training
• Test operator skill level
8 minutes
Price: $399
LIFT TRUCK OPERATOR TRAINING SERIES
This compliance series covers how a lift truck (also known as a forklift) works, safe operating rules, load handling, inspection and emergency procedures.
Price: $550 for 2-program set
20 minutes
Price: $325
15 minutes
Price: $325
|
|
|
|
“Excavator Safety”
A four-part video that instructs workers on excavator use including discussions on hand signal use, maintenance, level machine operation, use of excavator as a lift crane and utilization on soft ground. 90 minutes total.
Part 1: Excavator Operating Safety (30 min)
Part 2: Hand Signals (10 min)
Part 3: Safe Excavator Operating Practices (30 min)
Part 4: Excavators as Lift Crane (20 min)
Price: $260 VHS DVD
“Introduction to Trenching Hazards”
Covers major hazards and safeguards in trenching operations. Focus is on preventing and protecting against cave-in. Sloping, shoring and trench boxes are explained.)
27 minutes
Price: $160
“Fundamentals of Excavator Operation”
#1 “The Excavator”
Major components, general excavator safety, service and preventative maintenance. (12 min)
#2 “Trench Digging”
Setup, digging techniques, minimum safety requirements, productive cycle times. (12 min)
#3 “Trench Servicing and Backfilling”
Servicing trenches, bedding procedures, backfilling, co-workers, changing and carrying buckets. (12 min)
#4 “Loading Haul Units”
Truck loading techniques, positioning, productive cycle times, climbing up and down inclines. (12 min)
#5 “Benching and Sloping”
Setup, benching techniques, sloping techniques. (12 min)
Price: $395
“Trench Safety: Don’t Dig Your Own Grave”
Most people who work in and around trenches don’t believe an accident could happen to them. This program will remedy that.. It opens with the recreation of a trench cave in, then it highlights two real life accidents. It features actual rescue footage and interviews with rescue personnel who recount what the situation was, what they did and how it felt.
19 minutes
Price: $495
|
|
|
|
"Leadership Awareness for Mobile Crane Operations"
Provides valuable insight that every team leader, foreman, or site supervisor should have to help prevent crane accidents. It will give them the right questions to ask, as well as the right answers. Regular review of this video can reinforce your awareness of safety issues and help protect your valuable investment in lift equipment and personnel.
11 minutes
Price: $395
"Cranes: Types, Components and Case Histories"
Describes crane types and how to select the right crane. Illustrates tower and mobile cranes in operation and shows the results of improper setup and operation.
19 minutes
Price: $160
"Setup For Safety"
Fifty percent of all crane accidents are attributed to improper setup. Setup for Safety demonstrates and explains the critical points of safe operations including: 1) setting the crane up on firm, level ground. 2) using hardwood mats or blocking when necessary under out riggers. 3) avoiding setup in hazardous areas. 4) using ropes or barricades to prevent entry into the lift area. 5) inspecting the setup and the crane. Also includes an animated section that illustrates to the operator how the crane imposes force on the ground. Very interesting!
18 minutes
Price $295
"Pre-Operational Inspection for Hydraulic Cranes"
Most accidents caused by equipment failure can be easily avoided by a thorough pre-operational inspection of the crane, this step-by-step inspection video follows OSHA and ANSI guidelines. Now supervisors and operators, can have the peace of mind that practical, hands-on inspection training provides. The video includes a free Pre-Operational Inspection form.
I8 minutes
Price $295
"Pre-Operational Inspection for Lattice Boom Cranes "
Thorough crane inspection and maintenance, beginning with the daily pre-operational inspection, is the cornerstone of all safe crane operations. Crane(safety may be severely jeopardized if this is not carried out in accordance with prevailing regulations and standards, as well as the manufacturer's own requirements. The "Pre-Operational Inspection for Lattice Boom Cranes" provides a step-by-step guide to this essential yet frequently underestimated task.
15 minutes
Price $295
"Hazard Awareness in Crane Operating Areas"
Alerts riggers, operators and others to the hazards in crane operating areas. Includes discussion of load weights and crane capacities.
15 minutes
Price: $160
"Working Cranes Near Power Lines"
Electrocution from cact with power lines is the major cause of serious injury and death to crane operators and ground crew. Supervisors, operators, and members of the ground crew must know how to properly set up and perform work around power lines. Education on cautious operations saves lives!
28 minutes
Price $295
"Safe Crane Operation and Practices"
Also
Available in Spanish
Language Version
A four-part program which covers the basics for safe crane operation, including setup, hand signals, proper understanding of all lift capacity charts and operation. 110 minutes.
Price: $260 VHS DVD
Part 1: Crane Operating Safety
40 minutes
Part 2: Crane Setup
30 minutes
Part 3: Hand Signals
10 minutes
Part 4: Lift Capacity Charts
30 minutes
“How To Properly Interpret A Load Chart”
Ensures complete understanding of your crane’s lifting capacities. Comprehensive classroom and field applications are examined and operators learn proven methods to precisely calculate the safety of any lift.
20 minutes
Price: $295
"Mobile Crane Communications"
This video details the crane communications process by; discussing the signal person’s responsibilities, comparing and contrasting various verbal communication devices, and physically demonstrating the industry standard crane specific hand signals with corresponding crane actions. Clear and concise communication between the operator and signal person is a MUST in any crane operation.
Mobile Crane Communications
20 minutes
Price $295
"Hand Signal Communication"
Hand Signals save lives! OSHA, ANSI and government regulations require that proper instruction be conducted for all pertinent personnel. Hand Signal Communication shows you how to properly use mobile crane hand signals effectively and accurately. Hand Signal Communication is ideal for training programs, safety meetings, and general refresher courses on mobile crane equipment of all sizes. The video includes a free Hand Signal Examination for use after viewing.
I8 minutes
Price $295
"International Hand Signals"
Presents and reviews hand signals for safe operation when views or obscured or when working near electrical lines.
7 minutes
Price: $160
|
|
|
|
“Overhead Crane Safety”
This comprehensive program is divided into five brief modules. An overview of the various types of cranes includes bridge cranes, monorails, and jib hoists and is followed by segments on daily and periodic inspections, safe operating practices, and proper rigging procedures, including emphasis on no shop-made devices. A final review is included.
22 minutes
Price $649
"Overhead Crane Safety "
Since overhead cranes are designed to travel the full length and width of a building and make lifts from any point in the building, accidents can occur anywhere, at anytime. Overhead Crane Safety uses a hands-on approach to provide practical safety instruction. Points covered, using a variety of cranes and workplace settings, include: 1) an overview of the roles and responsibilities of supervisors, operators, riggers, and signal persons. 2) pre-operational and periodic inspection requirements. 3) safe operating procedures. 4) requirements for operators. 5) hand signals. Overhead Crane Safety emphasizes the importance of overhead cranes in daily industrial operations.
This video uses animation to illustrate the effects of side loading. Also includes actual shots of one of the most critical lifts in the U.S.- the lifting of the Space Shuttle at the Kennedy Space Center's vertical assembly building.
18 minutes
Price $295
All safety starts with learning the basic fundamentals. This video details the basic fundamentals of overhead crane operations by systematically demonstrating a daily operator inspection, as well as numerous safe operator practices. Whether your operators are new hires or seasoned veterans "Basic Overhead Crane Safety" can reinforce the basic fundamentals of overhead crane safety in their daily operations.
17 minutes
Price $295
"Cab Operated Overhead Crane Safety"
This video presents an overview of the daily operator inspection, crane positioning and moving techniques, safe operator practices and shutdown procedures. This safety video will give your operators valuable insight into cab operated overhead crane safety. Cab Operated Overhead Crane Safety is an excellent training asset and a MUST HAVE for everyone concerned with safety in the Material Handling Industry.
17 minutes
Price $295
"Remote Controlled Overhead Crane Safety"
This safety video presents an overview of operating procedures to follow when using a remote ccsarolled overhead crane. It demonstrates the daily operator inspection, crane po
